DALLAS CHIP READERSHomepage
Dallas Chip Readers 2400
Dallas Chip Reader DSRS2130
COMPLETE PRODUCT ASSORTMENT IN THE CZECH LANGUAGE
Reader prices: from 68,-Euro depending on design More information can be obtained from the manufacturer: firstname.lastname@example.org
Dallas chip Readers 2400: DSRS2430, DSRS2419, DSRS2433 a DSRS2433L
Dallas Chip Reader series 2400 there are new types of DS1990 chip readers for RS232 and USB.
Three types of readers are available, the single transfer protocol is ASCII format and can be easily implemented into other systems.
In addition to transmitting the chip serial number, you can control the LED, block reader activity, and read the reader type number.
The freely available control software allows you to read both the chip code into your own window and another active window on your computer.
Customized software can be customized on request.
On request, readers can also be supplied in a different design (without cabinet, plug readable via connector, ...).
RS485 readers can also be produced and have up to 128 readers on one communication line.
Separate chips DS1990A together with the DS9093 plastic keychain can be ordered for each reader or separately without a reader (in this case min.10pcs).
Chip Reader DSRS2430 is connected to a computer with a 1.5 m cable that ends with a 9-pin Canon connector. Power is provided directly from the computer's RS232 line.Technical dokumentation DSRS2430
Chip Reader DSRS2419 is connected to a computer with a 1.5 m (1.5 m) cable that ends with a 9-pin Canon connector. The power supply is an external DC voltage of 9 to 30V.Technical documentation DSRS2419
Chip Reader DSRS2433 is connected to the computer via a 1.5m cable that ends with a standard USB-A connector. Power is provided from the USB interface.Technical documentation DSRS2433
Chip Reader DSRS2433L is different from the previous reader by the length of the cable ending also with the standard USB-A connector. In addition, this connector has a signal converter that allows cable lengths of up to 100m. The basic length of the cable is 5m and can also be ordered with cable lengths of 5m, up to 100m. Power is provided from the USB interface.
Chip Reader DSRS2130
Chip Reader DSRS2130 is connected to a computer with a 3m (max.10m) cable ending with a 9-pin Canon connector. The device is equipped with a single-chip microprocessor that provides reader code reading from the chip and immediately transfers data to the computer. This whole process is very fast and does not exceed 100 ms including receipt and basic code processing by computer. The device does not need any external power supply. Power is provided directly from the computer's RS232 line.Technical documentation DSRS2130
* Questions, consultations and orders: email@example.com * Phone: 603 217 899 *